H3C Technologies H3C Intelligent Management Center - Manual (Page 403)

381
Viewing a wireless custom view topology
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > View Management > Custom Views.
The Wireless Custom View List page displays all wireless custom views.
3. Continue the procedure in one of the following ways:
{
Click the View Topology icon for the wireless custom view whose topology you want to
view.
{
Click the name of the target wireless custom view, and on the Device List page, click the
View Topology icon.
The page for displaying the topology appears.
The topology displays the AC and all fit APs of the wireless custom view. The topology can be
modified as needed. For more information, see "
Modifying a wireless custom view ."
Locating an AC or fit AP on a wireless custom view
This function allows you to locate an AC or a fit AP in the topology of a wireless custom view.
To locate an AC or a fit AP:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > View Management > Custom Views.
The Wireless Custom View List displays all wireless custom views.
3. Click the name of the target wireless custom view.
The Device List page appears.
4. Click the Operation icon for the AC or fit AP you want to locate.
5. Select View Topology from the menu.
The page for displaying the topology appears.
The location view where the AC or fit AP is selected is highlighted in the topology.
Locating a fit AP on a wireless custom view to a Mapbar map
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > View Management > Custom Views.
The Wireless Custom View List displays all wireless custom views.
3. Click the name of the target wireless custom view.
The Device List page appears.
4. Click the Operation icon for the fit AP you want to locate to the Mapbar map.
5. Select Locate to Map from the menu.
The Mapbar Map page appears.
The location view where the fit AP is selected is highlighted on the Mapbar map. Before locating a fit
AP to the Mapbar map, configure wireless locating. For more information, see " GIS locating ."