H3C Technologies H3C Intelligent Management Center - Manual (Page 114)

92
10. Click Back to close the dialog box.
Deleting a radio policy
Deleting a radio policy deletes all information related to the radio policy. You cannot delete the
default radio policy default_rp and any radio policy that is bound to a radio.
To delete a radio policy:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
3. Click the Operation icon for the target AC.
4. Select Radio Policy from the menu.
The Radio Policy Management page appears. All the radio policy information of the AC is
displayed on the Radio Policy List.
5. Click the Operation icon for the radio policy you want to delete.
6. Select Delete from the menu.
A confirmation dialog box appears.
7. Click OK.
Configuring radios in batches
To ease radio configuration and reduce repetitive operations, WSM allows operators to configure
public parameters for multiple radios of the fit APs managed by an AC in batches.
You can access the Radio Batch Configuration page from the AC details page or the configuration
management page. The following information uses the AC list page as an example.
To configure radios in batches:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
3. Click the device label of the target AC.
4. Click the Radio Batch Configuration link in the Wireless Service area to the right of the page.
The Radio Batch Configuration page appears.
5. Select and set the parameters as needed.
{
Radio Type—Select a radio type. Options are:
− 802.11a
− 802.11b
− 802.11g
− 802.11bg
− 802.11at
− 802.11an
− 802.11gn