Viewing mesh profiles for a fat ap, Viewing mesh interfaces for a fat ap, Locating a fat ap on a mapbar map – H3C Technologies H3C Intelligent Management Center User Manual
Page 254: Configuring fat ap global parameters
232
Viewing mesh profiles for a fat AP
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Fat APs.
The Fat AP List page displays all fat APs.
3.
Click the Operation icon
for the fat AP for which you want to view mesh profiles, and from
the menu, select
Mesh Profile Management.
The Mesh Profile Management page appears.
All mesh profile information for the fat AP is displayed in the Mesh Profile List. You can add,
modify, and delete mesh profiles, view mesh profile details, and bind radios to or unbind
radios from mesh profiles. For more information, see "
."
Viewing mesh interfaces for a fat AP
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Fat APs.
The Fat AP List page displays all fat APs.
3.
Click the Operation icon
for the fat AP for which you want to view mesh interfaces, and,
from the menu, select
Mesh Interface Management.
The Mesh Interface Management page appears.
All mesh interface information for the fat AP is displayed in the Mesh Interface List. You can add,
modify, and delete mesh interfaces, modify port security settings, and modify VLAN for the
mesh interfaces. For more information, see "
Locating a fat AP on a Mapbar map
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Fat APs.
The Fat AP List page displays all fat APs.
3.
Click the Operation icon
for the fat AP that you want to locate on a Mapbar map.
4.
Select
Locate to Map from the menu.
The Mapbar Map page appears.
The selected fat AP is highlighted on the Mapbar map. Before locating a fat AP on a Mapbar
map, configure wireless locating. For more information, see "
Configuring fat AP global parameters
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Fat APs.
The Fat AP List page displays all fat APs.
3.
Click the device label of the target fat AP.