H3C Technologies H3C Intelligent Management Center - Manual (Page 609)

587
Mesh topology
You can view an AC mesh topology through wireless device topology, and view a fat AP mesh
topology through location view topology.
Viewing an AC mesh topology
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Wireless Topology.
A wireless topology window appears, displaying all ACs and fat APs. You can click the icon of
an AC or AP to display the device basic information.
3. Right-click the icon of an AC, and then select Open Mesh Topology from the menu.
The mesh topology of the AC appears.
4. Click the icon of the AC to display its basic information.
5. You can perform the following operations on a fit AP that connects to the AC:
{
Click the icon of the fit AP to display its basic information.
For more information, see "
Viewing the device topology of an AC ."
{
Right-click the icon of the fit AP, and then select an operation from the menu.
Device Information displays the device details, and Display Physical Topology displays the
physical connection between the AC and the fit AP.
6. Right-click the link (solid green line) between an AC and a fit AP, and then select Link
Information from the menu. A solid line represents the physical connection between an AC and
a fit AP. A dotted line represents a wireless connection between fit APs.
Link information for physical connections between an AC and a fit AP:
{
Control Channel Security Policy—Security policy of the control channel used by the CAPWAP
channel between an AC and a fit AP.
{
Control Channel Startup Time—Startup time of the control channel used by the CAPWAP
channel between an AC and a fit AP.
{
Data Channel Security Policy—Security policy of the data channel used by the CAPWAP
channel between an AC and a fit AP.
{
Data Channel Startup Time—Startup time of the data channel used by the CAPWAP channel
between an AC and a fit AP.
7. Right-click the link (dotted green line) between fit APs, and then select Link Information from the
menu.
The Mesh Link Information dialog box appears.
Basic Information tab
{
Left Node—Name of the left node the mesh link.
{
Left Radio ID—Radio ID of the left node in the mesh link.
{
Right Node—Name of the right node in the mesh link.
{
Right Radio ID—Radio ID of the right node in the mesh link.
{
Mesh ID—ID of the mesh network.
{
Duration—Active time of the mesh link.