H3C Technologies H3C Intelligent Management Center - Manual (Page 316)

294
Customizing the client list
You can customize the Client List to remove a column, such as the Online Duration column. You can
customize all columns except the Client Status, Radio Type, Signal Strength, and Operation columns.
By default, all columns are customized.
To customize the client list:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Clients.
The Clients page displays all clients.
3. Click Custom Columns.
4. Customize the desired columns.
5. Click Default. All columns are selected.
6. Click OK. Only customized columns are displayed on the client list.
Querying clients
WSM provides basic query and advanced query. Basic query criteria include several key parameters
for quick search. Advanced query offers various query criteria for precise match.
To query clients:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Clients.
The Clients page displays all clients.
3. Perform a basic query:
a. Enter the MAC address of the client. WSM supports fuzzy matching for this field.
b. Click the Query icon . The Client List displays all clients matching the query criteria.
c. Clear the Query field, and click the Query icon to display all clients.
4. Perform an advanced query:
a. Click next to the Query field to expand the Query area. Click it again to hide the Query
area.
b. Enter or select one or more of the following query criteria:
{
Username—Username used by the client to access the wireless network. WSM supports
fuzzy matching for this field.
{
MAC Address—Enter the MAC address of the client. WSM supports fuzzy matching for this
field.
{
Device Type—Select a device type for the client. Options are Unlimited, AC, Fit AP, and Fat
AP.
{
Device Label—Enter the device label of the client. WSM supports fuzzy matching for this field.
Device Label does not serve as a query criterion when Device Type is set to Unlimited.
{
Radio Type—Select a radio type for the access AP. Options are:
− All
− 802.11a