H3C Technologies H3C Intelligent Management Center - Manual (Page 109)

87
{
Delete—Click the Delete icon to delete the radio.
Viewing radio policy details
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
3. Click the Operation icon for the AC you want to view.
4. Select Radio Policy from the menu.
The Radio Policy Management page appears, displaying all radio policies and their bound
radios of the AC.
5. Click the name of a radio policy to view its details.
Radio Policy Details
{
Policy Name—Name of the radio policy.
{
Beacon Interval (TU)—Interval at which an AP sends a beacon frame.
{
DTIM Interval—Number of beacon intervals an AP waits before it sends buffered multicast
and broadcast frames.
{
RTS Threshold (bytes)—Length of frames for which the request to send (RTS) method is used.
{
Fragment Threshold (bytes)—Maximum length of frames that can be transmitted without
fragmentation.
{
Short Frame Retransmission Threshold—Maximum number of attempts to transmit a frame
shorter than the RTS threshold.
{
Long Frame Retransmission Threshold—Maximum number of attempts to transmit a frame
larger than the RTS threshold.
{
Rx Lifecycle (ms)—Interval for an AP to hold a received frame in its buffer memory.
{
Max Clients—Maximum number of clients that can be associated with a radio that uses the
policy.
6. Click Close.
Adding a radio policy
You can add a radio policy for an AC in the following methods:
• Normal method—Add a radio policy in Radio Policy Management.
• Express method—Add a radio policy by using the template. For more information about radio
policy templates, see " Managing radio policy templates ."
Normal method
To add a radio policy by using the normal method:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
3. Click the Operation icon for the target AC.
4. Select Radio Policy from the menu.