H3C Technologies H3C Intelligent Management Center - Manual (Page 581)

559
− One-off
− Periodical
{
Creator—Name of the operator who created the energy policy.
{
Created Time—Time when the energy policy was created.
{
Copy—Click the Copy icon to copy the energy policy. You can then modify parameters of
the copy and save it as another energy policy.
{
Modify—Click the Modify icon to modify the energy policy.
{
Delete—Click the Delete icon to delete the energy policy.
If the Energy Policy List contains enough entries, the following navigational aids will be displayed.
• Click the Next Page icon to page forward in the Energy Policy List.
• Click the Last Page icon to page forward to the end of the Energy Policy List.
• Click the Previous Page icon to page backward in the Energy Policy List.
• Click the First Page icon to page backward to the front of the Energy Policy List.
Click 8, 15, 50, 100, or 200 at the upper right of the Energy Policy List to specify the number of items
you want to display on each page.
Querying energy policies
WSM allows you to filter energy policies with specific criteria.
To query energy policies:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Energy Policy Management.
The Energy Policy List page displays all energy policies.
3. Enter or select one or more of the following query criteria:
{
Policy Name—Enter the name of the energy policy. WSM supports fuzzy matching for this
field.
{
Execution Mode—Select the mode in which the energy policy is executed. Options are:
− One-off
− Periodical
− All
{
Policy Type—Select the operation type of the energy policy. Options are:
− Start/Stop AP
− Start/Stop Radio
− Modify Radio Power
− Start/Stop SSID.
{
Policy Status—Select the state of the energy policy. Options are:
− Waiting
− Executing
− Suspended