H3C Technologies H3C Intelligent Management Center - Manual (Page 309)

287
14 Managing Aruba fit APs
WSM enables you to manage Aruba fit APs. If an Aruba AC is added to the IMC Platform, IMC can
obtain information about fit APs managed by the AC.
Viewing the fit AP list
For more information, see " Viewing the fit AP list ."
Querying fit APs
For more information, see " Querying fit APs ."
Viewing detailed information about a fit AP
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs to enter the
Fit APs List page.
3. Click the device label link for the target Aruba AP.
Basic Information
{
AP Label—Label of the AP on the IMC Platform. (Configurable.)
{
Online Status—Online status of the AP. Options are Online and Offline.
{
AP Name—Name of the AP. This parameter is configured on the AC and cannot be
modified on the IMC Platform.
{
Serial Number—Serial number of the AP.
{
AC—Name of the AC that manages the AP.
{
Model—Model of the AP.
{
MAC Address—MAC address of the AP.
{
IP Address—IP address of the AP.
{
Work Mode—Work mode of the AP. Options are Normal, Monitor, Hybrid, and Unknown.
For more information, see
Table 18 .
Table 18 Working mode of an AP
Items Description
Normal No radio of the AP is in am-mode mode.
Monitor All radios of the AP are in am-mode mode.
Hybrid Some radios of the AP are in am-mode mode.
Unknown No information is obtained about the AP's working mode.