H3C Technologies H3C Intelligent Management Center - Manual (Page 482)

460
NOTE:
You can sort the countermeasure policy list by all fields except the Operation field. Click the column
label to sort the list by the selected field. The column label allows you to toggle between the sort options
specific to each field.
Synchronizing the countermeasure policy list
IMC supports synchronizing the countermeasure policy list automatically or manually. By default, IMC
automatically synchronizes the countermeasure policy list every 2 hours.
To manually synchronize the countermeasure policy list:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Virtual Security Domain from the navigation tree.
3. Click the Countermeasure Policy tab.
The countermeasure policy list displays all countermeasure policies.
4. Click Synchronize to start synchronizing the countermeasure policy list.
The page is refreshed to display the most recent data after the synchronization process is
completed.
Viewing countermeasure policy details
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Virtual Security Domain from the navigation tree.
3. Click the Countermeasure Policy tab.
The countermeasure policy list displays all countermeasure policies.
4. Click the name link for the target countermeasure policy to view its details.
Countermeasure Policy Information
{
Name—Name of the countermeasure policy.
{
AC—Label of the AC where the countermeasure policy is configured.
{
Enable Countermeasures on a Fixed Channel—Options are Yes and No.
{
Functions supported by the countermeasure policy
− Item—Whether the countermeasure item is supported. Options are Yes and No.
− Priority—Countermeasure item priority in the range of 0 to 9. A greater value represents
a higher priority.
5. Click Close.
Querying countermeasure policies
To perform a basic query:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Virtual Security Domain from the navigation tree.
3. Click the Countermeasure Policy tab.
The countermeasure policy list displays all countermeasure policies.
4. Enter a partial or complete name of the countermeasure policy in the query field on the upper
right corner.