H3C Technologies H3C Intelligent Management Center - Manual (Page 645)

623
To view an AP availability summary report, configure the following parameters:
• Parameter "Begin Time and End Time"—Select a statistics collection time range from the list. You
can select a specific time range, such as Last Hour, Last Day, Last Week, or Last Month, or
select Custom Range, and then specify the start time and end time manually.
• Location—Select a specific location view for statistics collection, or select All AP Devices.
• Begin Time/End Time—These two parameters appear only when you select Custom Range. Click
the field next to Begin Time/End Time to select the start time/end time from the calendar that
appears, in the format of YYYY-MM-DD hh:mm. The end time must be later than the start time.
Figure 87 shows an example AP availability summary report.
Figure 87 AP availability summary report