H3C Technologies H3C Intelligent Management Center - Manual (Page 300)

278
− Online
− Online (Primary)
− Online (Secondary)
− Offline
If you select Online, all online engineered fit APs, including Primary and Secondary, are
displayed.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
c. Click Query.
d. The Device List displays all engineered fit APs matching the query criteria.
e. Click Reset to clear the query criteria and display all engineered fit APs.
Switching fit APs
This function enables you to switch between a normal fit AP and an engineered fit AP, or switch
normal fit APs to engineered fit APs in batches. You can access the Switching Fit APs function from the
fit AP details page.
Switching between a normal fit AP and an engineered fit AP
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
3. The Fit AP List page displays all fit APs.
4. Click the device label of the target fit AP.
The fit AP details page appears.
5. Click Set as Engineered Fit AP or Set as Normal Fit AP in the Action menu located on
the right of the page.
{
You can switch the current fit AP to an engineered fit AP if you see Set As Engineered Fit AP
in the Action area to the right of the page.
{
You can switch the current fit AP to a normal fit AP if you see Set As Normal Fit AP in the
Action area to the right of the page.
{
The current fit AP cannot be switched if you do not see Set As Engineered Fit AP or Set
As Normal Fit AP in the Action area to the right of the page.
Switching engineered fit APs to normal fit APs in batches
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
3. The Fit AP List page displays all fit APs.
4. Click More and select Engineered Fit AP List.
The Engineered Fit AP List page displays all engineered fit APs.
5. Select the target engineered fit APs.
6. Click Set as Normal Fit AP.