H3C Technologies H3C Intelligent Management Center - Manual (Page 438)

416
Adding rogue clients to the MAC-to-attack list
To have a rogue client attacked, add the MAC address of the rogue client to the MAC-to-attack list.
Adding a rogue client to the MAC-to-attack list
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > WIDS Management > Rogue Clients.
3. Use either of the following methods to add a rogue client to the MAC-to-attack list:
a. Click the icon in the Operation field, and then click the Add to Attack List link.
b. Click the MAC address link of the rogue client, and then click the Add to Attack List link in
the Action area to the right of the page.
The Add to Attack List link appears only when the rogue client is not on the MAC-to-attack list.
4. Click OK.
Adding rogue clients to the MAC-to-attack list in batches
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > WIDS Management > Rogue Clients.
3. Select one or more rogue clients, and click Add to Attack List.
A confirmation dialog box appears.
4. Click OK.
The Add to Attack List Result page appears.
{
MAC Address—MAC address of the client.
{
AC—Label of the AC with which the client is associated.
{
Result—Operation result.
Removing rogue clients from the MAC-to-attack list
After you remove a rogue client from the MAC-to-attack list, the AC does not attack the client anymore.
Removing a rogue client from the MAC-to-attack list
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > WIDS Management > Rogue Clients.
3. Use either of the following methods to remove a rogue client from the MAC-to-attack list:
a. Click the icon in the Operation field, and then click the Remove from Attack List link.
b. Click the MAC address link of the rogue client, and then click the Remove from Attack List
link in the Action area to the right of the page.
The Remove from Attack List link appears only when the rogue client is on the MAC-to-attack list.
4. Click OK.
Removing rogue clients from the MAC-to-attack list in batches
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > WIDS Management > Rogue Clients.
3. Select one or more rogue clients, and click Remove from Attack List.