H3C Technologies H3C Intelligent Management Center - Manual (Page 183)

161
Adding an AP group
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
3. Click the operation icon for the target Aruba AC, and select Group Configuration from the
menu.
The Group Configuration page appears and all AP groups are displayed in the AP group list.
4. Click Add.
The Add Group window appears.
5. Enter a name for the AP group, in the range of 1 to 52 characters.
For more information about the available characters, see the tip information.
6. Click OK.
Binding or unbinding a WLAN
An AP group can be bound to multiple WLANs.
By default, an AP group is not bound to any WLAN.
To bind or unbind a WLAN:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
3. Click the operation icon for the target Aruba AC, and select Group Configuration from the
menu.
The Group Configuration page appears and all AP groups are displayed in the AP group list.
4. Click the icon for the target AP group.
The Bind to WLAN page appears and all WLANs are displayed in the WLAN List.
WLAN List
{
Binding Status—Binding status of the WLAN.
{
SSID—SSID of the WLAN.
{
Profile Name—Profile name of the WLAN.
5. To bind a WLAN to the AP group, select the box under the Binding Status field. To unbind a
WLAN from the AP group, clear the box under the Binding Status field.
6. Click OK.
The Result List page appears and the binding or unbinding result of each WLAN is displayed in
the Result List.
Result List
{
Group Name—Name of the AP group.
{
SSID—SSID of the WLAN.
{
AC—Device label of the AC to which the AP group belongs.
{
Result—Binding or unbinding result.
7. Click Close.