H3C Technologies H3C Intelligent Management Center - Manual (Page 195)

173
NOTE:
You can sort the Fat AP List by every field except the Operation field. Click the column label to sort the
list by the selected field. The column label allows you to toggle between the various sort options specific
to each field.
Querying fat APs
WSM provides basic query and advanced query. Basic query criteria include several key parameters
for quick search. Advanced query offers various query criteria for precise match.
To query fat APs:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fat APs.
The Fat AP List page displays all fat APs.
3. To perform a basic query:
a. Enter the device label (case-insensitive) or IP address of the fat AP. WSM supports fuzzy
matching for this field. For example, if you enter 19, all fat APs with device labels or IP
addresses containing 19 are queried.
b. Click the Query icon . The Device List displays all fat APs matching the query criteria.
c. Clear the Query field, and click the Query icon to display fat APs.
4. Perform an advanced query:
a. Click next to the Query field to expand the Query area. Click it again to hide the Query
area.
b. Enter or select one or more of the following query criteria:
{
Device Label—Enter the device label of the fat AP. WSM supports fuzzy matching for this
field.
{
IP Address—Enter a partial or complete IPv4 address of the fat AP. WSM supports fuzzy
matching for this field.
{
Radio Type—Select a radio type from the list. Options are:
− All
− 802.11a
− 802.11b
− 802.11g
− 802.11bg
− 802.11at
− 802.11an
− 802.11gn
− 802.11n (2.4GHz)
− 802.11bgn
− 802.11n
− 802.11n(5GHz)
{
Channel—Enter the channel used by the fat AP. WSM supports fuzzy matching for this field.