H3C Technologies H3C Intelligent Management Center - Manual (Page 149)

127
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Comware-Based tab.
4. In the Network Management area, click the AC Group link.
The AC Group List page displays all AC groups.
5. Click the Modify icon for the target AC group.
The Modify AC Group page appears.
6. Enter a new name for the AC group to uniquely identify the group in the list.
7. Click OK.
Deleting an AC group
This function deletes an AC group from WSM, regardless of whether the AC group has any AC.
Deleting the AC group removes the ACs from the group, but not from WSM.
To delete an AC group:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Comware-Based tab.
4. In the Network Management area, click the AC Group link.
The AC Group List displays all AC groups.
5. Click the Delete icon for the target AC group.
A confirmation dialog box appears.
6. Click OK.
Configuring the default AC synchronization operation
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Comware-Based tab.
4. In the Network Management area, click the AC Group link.
The AC Group List displays all AC groups.
5. Select whether to synchronize AC configurations by default. Options are:
Yes—the configurations are synchronized between primary/secondary ACs by default when
the configuration of an AC changes.
No—the configurations are not synchronized between primary/secondary ACs by default when
the configuration of an AC changes.
6. Click OK.