H3C Technologies H3C Intelligent Management Center - Manual (Page 408)

386
22 Managing wireless topologies
WSM provides the following types of wireless topologies:
• Wireless device topology: Displays all managed ACs and fat APs in WSM, and allows you to
view the fit APs managed by an AC through the AC device topology, and the clients associated
with a fat AP through the fat AP device topology.
• Location view topology: Displays the APs contained in a location view and their associated
clients.
• Wireless custom view topology: Displays the AC and its managed fit APs contained in a custom
view, and allows you to view the clients associated with the fit APs.
The basic functions such as Open Device Panel, Tools, Root Alarms, Find, Reload, and Device Label
are the same as IMC Platform topologies. This document describes only the functions specific to
wireless topologies. For basic topologies operations, see H3C IMC Base Platform Administrator
Guide.
Wireless device topology
The wireless device topology displays all managed ACs and fat APs in WSM, and allows you to view
the fit APs managed by an AC through the AC device topology, and the clients associated with a fat
AP through the fat AP device topology.
The wireless device topology is further categorized into the following types:
• AC device topology—Displays the fit APs managed by an AC, and allows you to view the clients
associated with the fit APs.
• Fat AP device topology—Displays the clients associated with a fat AP.
• Physical topology—Displays the network devices involved in connecting an AC to the specified
fit AP. This topology is available only when both the AC and fit AP are Comware-based devices.
Viewing the wireless device topology
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Wireless Topology.
The wireless device topology displays all ACs and fat APs.
Perform the following operations on an AC from the topology:
• Click the icon of an AC. The tip window displays the following information about the AC:
{
Device Label—Device label that identifies the AC in the IMC Platform. Click the device label
of an AC to view its details.
{
IP Address—Management IP address of the AC.
{
Device Status—Current alarm status of the AC.
{
SysName—Name configured on the AC.
{
Vendor—Vendor of the AC.