H3C Technologies H3C Intelligent Management Center - Manual (Page 190)

168
Configuring a radio policy
You can configure both 802.11a and 802.11g radio policies. After you bind a radio policy to an AP
group, the radios of the fit APs in the AP group operate using the specified type of radio policy.
Entering the radio policy management page
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
3. Click the operation icon for the target Aruba AC, and select Radio Policy from the menu.
The Radio Policy Management page appears and all radio policies are displayed in the radio
policy list. By default, a default 802.11a radio policy and a default 802.11g radio policy exist
in the list.
Radio policy list
{
Policy Name—Name of the radio policy.
{
Radio Type—Radio type, including 802.11a radios and 802.11g radios.
{
Tx. Power (dBm)—Transmission power of the radio, in dBm. The maximum value is 127 dBm.
{
Channel—Current working channel of the radio.
{
Admin Status—Administrative status of the radio policy. Options are Up and Down. Only
radio policies in up state can be applied to a radio.
{
Bind to Group—Click the icon to bind or unbind an AP group.
{
Modify—Click the icon to modify the radio policy.
{
Delete—Click the icon to delete the radio policy. You cannot delete the default 802.11a
and 802.11g radio policies.
On the Radio Policy Management page, you can also do the following:
{
Click Refresh to the refresh the page.
{
Click Related Operations to configure the WLANs or AP groups.
If the radio policy list contains enough entries, the following navigational aids are displayed.
{
Click the Next Page icon to page forward in the radio policy list.
{
Click the Last Page icon to page forward to the end of the radio policy list.
{
Click the Previous Page icon to page backward in the radio policy list.
{
Click the First Page icon to page backward to the front of the radio policy list.
Click 8, 15, 50, 100, or 200 at the upper right of the radio policy list to configure how many
items per page you want to display.
NOTE:
You cannot sort the radio policy list.
Adding a radio policy
1. Click the Service tab.