Synchronizing uam client information, Locking clients, Unlocking clients – H3C Technologies H3C Intelligent Management Center User Manual
Page 332
310
The Clients page displays all clients.
3.
Click Client Info Management.
All client information is displayed on the client information list.
4.
Select the boxes next to the clients you want to delete.
5.
Click Delete.
A confirmation dialog box appears.
6.
Click OK.
Synchronizing UAM client information
This function helps you synchronize UAM client information.
To synchronize client information with UAM installed based on the same IMC Platform, operators can
directly synchronize UAM client information.
To synchronize client information with UAM installed based on a different IMC Platform, operators
must first configure the web service parameters provided by UAM. For more information, see
"
To synchronize UAM client information:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Clients.
The Clients page displays all clients.
3.
Click Client Info Management.
All client information is displayed on the client information list.
4.
Click Sync All.
View the most recent client information later because the synchronization process takes some
time.
Locking clients
WSM does not synchronize information of clients in Locked state.
To lock clients:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Clients.
The Clients page displays all clients.
3.
Click Client Info Management.
All client information is displayed on the client information list.
4.
Select clients to be locked and click Lock.
Unlocking clients
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Clients.