H3C Technologies H3C Intelligent Management Center - Manual (Page 306)

284
{
Admin Status—Administrative state for the radio. Options are Up and Down. A radio can
provide wireless services only when both the Admin Status and Operation Status for the
radio are Up.
{
Operation—Click the Modify icon to modify the radio parameters.
2. From the Action bar, click the Refresh link to view the most recent information about the fit
AP.
For information about the other three functions, see "
General management functions ".
Modifying the admin status for a fit AP
The admin status for a fit AP determines the operation status for the radio of the fit AP.
To modify the admin status for a fit AP:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit APs page displays all Cisco fit APs.
3. Click the device label link of the target fit AP to view its details.
4. Click the Modify icon in the Basic Information area.
The AP Admin Status dialog box appears.
5. Select Enable or Disable.
6. Click OK.
Viewing detailed information about a radio
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit APs page displays all Cisco fit APs.
3. Click the device label link of the target fit AP, the detailed information page appears.
4. In the Radio Interface area, click the ID link for the target radio. The Fit AP Radio Parameters
dialog box appears.
Basic information
{
Radio ID—ID of the radio.
{
Radio Type—Type of the radio. Options are 802.11an or 802.11bgn. Radio type determines
the channel range you can use. For example, 802.11bgn radios can only operate on
channels 1 to 11 at the 2.4 GHz band.
{
Admin Status—Administrative state for the radio. Options are Down and Up. A radio can
provide wireless services only when both the admin status and operation status for the radio
are Up.
{
Operation status—Operation status of the radio. Options are Up and Down. The operation
status of a radio is Up only when both the admin status of the fit AP and the network status
of the radio are enabled.