H3C Technologies H3C Intelligent Management Center - Manual (Page 494)

472
{
AC—Select the AC whose Alarm Ignored Address List you want to query.
6. Click Query.
The Alarm Ignored Address List displays all alarm-ignored addresses matching the query
criteria. Click Reset to clear the query criteria and display all alarm-ignored addresses.
Deleting an address from an AC's alarm ignored address list
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3. Click the Alarm Ignored Address List tab.
The Alarm Ignored Address List displays all alarm-ignored devices.
4. Click the Operation icon for the alarm-ignored address you want to delete.
5. Select Delete from Alarm Ignored Address List from the shortcut menu.
A confirmation dialog box appears.
6. Click OK.
Blocked address list
The Blocked Address List displays information about the blocked devices on each AC's Static-Blocked
Address List by MAC address, including the address type (whether or not the address has been
detected in the network) and the detecting AC.
Viewing the blocked address list
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3. Click the Blocked Address List tab.
The Blocked Address List displays all blocked addresses.
Blocked Address List
{
MAC Address—MAC address of the blocked device.
{
Address Type—Type of the blocked device:
− Static—Indicates the blocked address is manually added to an AC's Blocked Address List,
but the sensor has not detected the device.
− Dynamic—Indicates the blocked address is not in the blocked address list, but the sensor
has detected the device.
− Static and Dynamic—Indicates the blocked address is in the blocked address list, and the
sensor has detected the device.
{
Detecting AC—If the Address Type is Static, this field displays the device label of the AC
whose Blocked Address List the address belongs. If the Address Type is Dynamic or Static
and Dynamic, this field displays the device label of the AC with which the sensor that
detected the address is associated. Click the AC label to view its details.
{
Operation—Click the Operation icon to bring up the operation menu, which contains an
option that allows you to delete the blocked device from the Blocked Address List.
If the Blocked Address List contains enough entries, the following navigational aids appear: