H3C Technologies H3C Intelligent Management Center - Manual (Page 730)

708
The Configuration Management page appears.
3. Click the Common tab.
4. In the Network Management area, click the Endpoint Identification Management link.
The Endpoint Identification Management page appears.
5. Click Vendor.
The Vendor List displays all the vendors that have been added to WSM.
6. Click Add.
The Add Vendor page appears.
7. Enter the vendor name in the Vendor field.
8. Enter a description for the vendor in the Description field.
9. Click OK.
Modifying a vendor
You can only modify the description for a vendor.
To modify a vendor:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Common tab.
4. In the Network Management area, click the Endpoint Identification Management link.
The Endpoint Identification Management page appears.
5. Click Vendor.
The Vendor List displays all the vendors that have been added to WSM.
6. Click the Modify icon for the vendor you want to modify.
The Modify Vendor page appears.
7. Modify the description for the vendor in the Description field.
8. Click OK.
Deleting a vendor
Before deleting a vendor that has been used in describing endpoint client information, you must
delete the client information first. For more information about deleting client information, see " Deleting
client information ."
To delete a vendor:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Common tab.
4. In the Network Management area, click the Endpoint Identification Management link.
The Endpoint Identification Management page appears.
5. Click Vendor.
The Vendor List displays all the vendors that have been added to WSM.