H3C Technologies H3C Intelligent Management Center - Manual (Page 70)

48
{
Primary Authentication—Enter the IP address of the primary authentication server.
{
Secondary Authentication—Enter the IP address of the backup authentication server.
{
Primary Accounting—Enter the address of the primary accounting server.
{
Secondary Accounting—Enter the address of the backup accounting server.
{
Authentication Key—Enter the key for authentication.
{
Confirm Authentication Key—Enter the key for authentication again.
{
Accounting Key—Enter the key for accounting.
{
Confirm Accounting Key—Enter the key for accounting again.
6. Click OK.
Modifying a RADIUS policy
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Fast Deploy WLAN.
3. In the Security Information field, click RADIUS Policy.
4. On the RADIUS Policy page, click the Modify icon for the target RADIUS policy.
5. On the page that appears, modify RADIUS policy parameters as needed. See " Adding a
RADIUS policy ."
6. Click OK.
Deleting a RADIUS policy
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Fast Deploy WLAN.
3. In the Security Information field, click RADIUS Policy.
4. On the RADIUS Policy page, click the Delete icon for the RADIUS policy you want to delete.
A confirmation dialog box appears.
5. Click OK.
Configuring a domain
This section describes domain configuration.
Adding a domain
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Fast Deploy WLAN.
3. In the Security Information field, click Domain.
4. On the Domain Configuration page, click Add.
5. On the Add Domain page, configure the following parameters:
{
Domain Name—Enter the domain name.