H3C Technologies H3C Intelligent Management Center - Manual (Page 526)

504
Figure 59 Displaying transmission rates (2.4 GHz)
Displaying AP operating channels on the map
You can display AP operating channels on the map in the following way:
Right-click on a blank area, and from the shortcut menu, select one of the following:
• Show Signal Cover Area > By Channel > 2.4GHz
• Show Signal Cover Area > By Channel > 5GHz
• Show Signal Cover Area > By Channel > Single Channel
If you select Single Channel, the Set Channel window appears. Enter a channel number, and click OK.
The map displays the signal coverage area of each AP. Click to view AP operating channels, as
shown in Figure 60 .