H3C Technologies H3C Intelligent Management Center - Manual (Page 456)

434
− Detection Only—Provides WIPS service and does not provide access services.
To modify the operating mode of a radio, click the Modify icon .
If WIPS is not enabled on the radio, or the sensor does not have Radio 1, the field displays
.
{
Radio 2—If WIPS is not enabled on the radio, or the sensor does not have Radio 2, the field
displays .
Description for the management status and detection mode of Radio 2 is the same as Radio
1.
{
Radio 3—If WIPS is not enabled on the radio, or the sensor does not have Radio 3, the field
displays .
Description for the management status and detection mode of Radio 3 is the same as Radio
1.
{
Virtual Security Domain—Name of the virtual security domain to which the sensor is bound.
{
AC—Label of the AC with which the sensor is associated. Click the label of the AC to view its
details.
{
Operation—Click the Operation icon for the sensor to display the operation menu.
The operational tasks provided in the menu list include deleting the sensor and the virtual
security domain to which the sensor is bound.
If the sensor list contains enough entries, the following navigational aids are displayed:
{
Click the Next Page icon to page forward in the sensor list.
{
Click the Last Page icon to page forward to the end of the sensor list.
{
Click the Previous Page icon to page backward in the sensor list.
{
Click the First Page icon to page backward to the front of the sensor list.
Click 8, 15, 50, 100, or 200 at the upper right of the sensor list to specify the number of items
you want to display on each page.
NOTE:
You can sort the sensor list by all fields except the Operation field. Click the column label to sort the list
by the selected field. The column label allows you to toggle between the sort options specific to each
field.
Synchronizing the sensor list
IMC supports synchronizing the sensor list automatically or manually. By default, IMC automatically
synchronizes the sensor list every 2 hours.
To manually synchronize the sensor list:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Sensor Management from the navigation tree.
The sensor list displays all sensors.
3. Click Synchronize to start synchronizing the sensor list.
The page is refreshed to display the most recent data after the synchronization process is
completed.