Viewing the device topology of an ac – H3C Technologies H3C Intelligent Management Center User Manual
Page 409
387
{
System Up for—System uptime of the AC.
{
Online APs—Total number of fit APs managed by the AC. Click the number to view the list of
all the managed fit APs.
{
Associated Wireless Clients—Number of clients associated with the fit APs managed by the
AC. Click the number to view the list of all the online clients. For more information about the
client list, see "
."
•
Right-click the icon of an AC. The menu displays the following options that can be applied to the
AC:
{
Open Topology—Allows you to open the device topology of the AC, from which you can
view the fit APs managed by the AC, and the clients associated with the fit APs.
{
Open Mesh Topology—Allows you to open the mesh topology of the AC. For more
information about mesh topologies, see "
Perform the following operations on a fat AP from the topology:
•
Click the icon of a fat AP. The tip window displays the following information about the fat AP:
{
Device Label—Device label that identifies the fat AP in the IMC Platform. Click the device
label of a fat AP to view its details.
{
IP Address—Management IP address of the fat AP.
{
Device Status—Current alarm status of the fat AP.
{
SysName—Name configured on the fat AP.
{
Vendor—Vendor of the fat AP.
{
Clients—Number of clients associated with the fat AP. Click the number to view the list of all
the online clients. For more information about the online client list, see "
•
Right-click the icon of a fat AP, and select Open Topology from the shortcut menu. The device
topology of the fat AP appears, displaying all the clients associated with the fat AP.
Viewing the device topology of an AC
1.
Click the Service tab.
2.
Locate the target AC using one of the following methods:
Method 1
a.
From the navigation tree, select WLAN Manager > Wireless Topology.
b.
Right-click the blank area and select Find from the shortcut menu. The Query Devices
window appears.
c.
Enter the device label of the target AC in the Content box.
d.
Click Query. The target AC will be displayed on the Find Result window. Select the AC.
Method 2
a.
From the navigation tree, select WLAN Manager > Resource Management > ACs.
b.
Click the Operation icon
of the target AC.
c.
Select
View Topology from the shortcut menu. The system automatically locates the AC
on the wireless device topology that appears.
3.
Double-click the icon of the AC, or right-click the AC icon and select Open Topology from the
shortcut menu.