H3C Technologies H3C Intelligent Management Center - Manual (Page 406)

384
NOTE:
When adding a position, you can enter the coordinates (latitude and longitude) of the position
manually, or you can click Label, find the geographic location of the position on the map, click the
map, and then the position is displayed on the map and the coordinates of the position are recorded.
Modifying a position
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > View Management > GIS View.
The Position List displays all position.
3. Click the Modify icon for the position you want to modify.
The Modify Position page appears.
4. Change the associated location view for the position.
5. Select a location view for the position from the Position drop-down list.
6. Click Select Picture to select a label to represent the position on the map.
7. Continue the procedure in one of the following ways:
{
Click Label to modify the geographic location of the position on the map.
The Longitude/Latitude field displays the longitude and latitude of the position automatically.
{
Enter the latitude and longitude of the position in the Longitude/Latitude field.
8. Enter the telephone number of the position in the Telephone field.
9. Enter the address of the position in the Address field.
10. Click OK.
NOTE:
After labeling or modifying a position on the map, you can modify the coordinates of the position
manually, or drag the label of the position on the map to modify the coordinates of the position. After
the drag operation, the new coordinates of the position are recorded automatically.
Deleting a position
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > View Management > GIS View.
The Position List displays all positions.
3. Click the Delete icon for the position you want to delete.
A confirmation dialog box appears.
4. Click OK.
Saving the default position
This function allows you to save the default position on the map when you enter GIS view.
To save the default position: