H3C Technologies H3C Intelligent Management Center - Manual (Page 728)

706
Configuring UAM parameters
By default, WSM displays the MAC addresses of online clients instead of their names. If UAM is
deployed on your network, you can enable WSM to obtain account information for online clients
from the UAM server. Configure UAM service parameters regardless of whether UAM and WSM are
deployed on the same server.
To configure UAM service parameters:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Common tab.
4. In the Network Management area, click the UAM Parameter Configuration link.
The UAM Parameter Configuration page appears.
5. Configure the following UAM service parameters:
{
IMC Master Server IP Address—Enter the IP address of the primary IMC server to which
UAM belongs. When UAM and WSM are deployed on the same server, enter 127.0.0.1.
{
Login Port—Enter the port to use for logging in to the UAM server.
{
Login Type—Select the protocol to use for logging in to the UAM server. Options are HTTP
and HTTPS.
{
Login Name—Enter the login user name.
{
Password—Enter the login password.
{
Confirm Password—Enter the login password again.
{
Automatically Obtain Client Information from UAM—Set whether WSM automatically
obtains the account name of a client from the UAM server when the client connects to the
network. WSM queries the account name by the MAC address of the client. This option is
not selected by default.
6. Click OK.
Managing endpoint identification
With endpoint identification management, you can add basic endpoint identification information,
including the endpoint vendor, endpoint type, and OS to WSM, so that when a client accesses the
network through the WLAN, WSM can display the information for the client on the Client List.
For information about managing clients, see "
15 Managing clients ."
Managing endpoint vendors
From the Vendor List page, you can query, add, modify, and delete a vendor.
Accessing the Vendor List page
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.