H3C Technologies H3C Intelligent Management Center - Manual (Page 454)

432
3. Enter a partial or complete OUI in the query field on the top right corner, in the format of
xx:xx:xx.
4. Click the Query icon . The OUI list displays all OUIs matching the query criteria.
5. Clear the Query field, and click the Query icon to display all OUIs.
Adding an OUI
You can add OUIs one by one to the static trusted OUI list or select OUIs from WSM.
To manually add an OUI:
1. Access the WIPS Management page.
2. Click the Static Trusted OUI List tab.
3. Click Add. The Add an OUI dialog box appears.
4. Enter a complete OUI, in the format of xx:xx:xx..
5. Click OK.
To select OUIs from WSM:
1. Access the WIPS Management page.
2. Click the Static Trusted OUI List tab.
3. Click Select. The dialog box for selecting OUIs appears.
4. Query OUIs:
a. Set the query criteria in the Query area.
− OUI—Enter a partial or complete OUI, in the format of xx:xx:xx..
− Vendor Name—Enter a partial or complete vendor name.
b. Click the Query icon . The OUI list displays all OUIs matching the query criteria.
c. Clear the Query field, and click the Query icon to display all OUIs.
d. Click Reset to clear the query criteria and display all OUIs.
5. Select one or more OUIs from the OUI List.
6. Click OK.
Deleting OUIs
After you delete an OUI from the static trusted OUI list, WIPS re-classifies the related devices after the
re-classification time is reached.
To delete OUIs:
1. Access the WIPS Management page.
2. Click the Static Trusted OUI List tab.
3. Click the icon for the target OUI to delete one OUI, or select multiple OUIs and then click
Delete to delete them in batches.
4. Click OK in the confirmation dialog box.
Configuring the function set
1. Access the WIPS Management page.
2. Click the Function Set tab.