H3C Technologies H3C Intelligent Management Center - Manual (Page 317)

295
− 802.11b
− 802.11g
− 802.11bg
− 802.11at
− 802.11an
− 802.11gn
− 802.11ac
− 802.11n(2.4GHz)
− 802.11n
− 802.11n(5GHz)
− 802.11ag
− Wired
{
Channel—Enter the channel used by the client. WSM supports fuzzy matching for this field.
{
SSID—Enter the SSID name used by the client to connect to the network. WSM supports
fuzzy matching for this field.
{
Location—Enter or select the location view name of the client. WSM supports fuzzy matching
for this field.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
c. Click Query to view all clients matching the query criteria on the Client List.
d. Click Reset to clear the query criteria and display all clients.
Viewing detailed information about a client
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Clients.
The Clients page displays all clients.
3. Click the MAC address of the target client.
For the client that goes online through an MSM series fat AP/fit AP, the following information is
displayed:
Basic Information
{
MAC Address—MAC address of the client.
{
Username—Username used by the client to access the wireless network, which is displayed
when the client accesses the network after passing third-party/local authentication; otherwise,
the username is not displayed.
{
IP Address—IP address of the client.
{
SSID—SSID name used by the wireless client to access the network. Click an SSID to view the
detailed information about the corresponding WLAN.
{
Radio Type—Radio type of the access AP.
{
AP—Device label of the fit AP or fat AP connected to the client. Click the label link of an AP
to view detailed information about the fit AP or fat AP.