H3C Technologies H3C Intelligent Management Center - Manual (Page 724)

702
Managing antenna models
This function allows you to select an antenna model for the newly-added radio on the user-defined AP
model. WSM contains system-defined antenna models and user-defined antenna models. You can
add, modify, and delete user-defined antenna models, and set the antenna parameters such as
direction, frequency, and maximum gain.
NOTE:
This function does not apply to Cisco wireless devices.
Viewing the antenna list
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Common tab.
4. In the Network Management area, click the Antenna Management link.
The Antenna List displays all antenna models.
Antenna List contents
{
Model—Model of the antenna.
{
Vendor—Vendor of the device to which the antenna model belongs.
{
Direction—Signal transmitting direction of the antenna model. Options are Omnidirectional
and Directional.
{
Frequency—Signal frequency of the antenna model. Options are 2.4GHz and 5GHz.
{
Max. Gain—Maximum gain for the signals of the antenna model.
{
Type—Type of the antenna model. Options are System-defined and User-defined.
{
Modify—Click the Modify icon for the user-defined antenna model to modify its
parameters. You cannot modify the parameters of the system-defined antenna models.
{
Delete—Click the Delete icon for the user-defined antenna model to delete the antenna
model. You can only delete the user-defined antenna models.
If the Antenna List contains enough entries, the following navigational aids are displayed.
Navigating the Antenna List
• Click the Next Page icon to page forward in the Antenna List.
• Click the Last Page icon to page forward to the end of the Antenna List.
• Click the Previous Page icon to page backward in the Antenna List.
• Click the First Page icon to page backward to the front of the Antenna List.
Click 8, 15, 50, 100, or 200 at the upper right of the Antenna List to specify the number of items you
want to display on each page.