H3C Technologies H3C Intelligent Management Center - Manual (Page 682)

660
a. Select an operator group.
All operators in the group can view the report. The Administrator Group is forcibly selected.
b. To view operators in an operator group, click the Operator Group Information icon to
the right of the target operator group.
The Operator Group Information window appears.
c. Select an operator group in the Group Name area.
The operators contained in the operator group are displayed on the right.
d. Click Close to the return to the page for adding a report.
5. Specify the period a report is generated:
A scheduled report period is determined by both the schedule type and schedule time settings.
{
Schedule Type—Contains fields such as Daily, Weekly, Monthly, Quarterly, Half Yearly, and
Yearly.
{
Report Start Date—Click the field next to Report Start Date to select a time from the calendar
that appears, in the format of YYYY-MM-DD hh:mm.
{
End By—Select the End by box, and enter an end time, or select an end time from the
calendar that appears, in the format of YYYY-MM-DD hh:mm.
WSM stops generating the scheduled report from the specified time.
6. Set the report file format: select a file format from the Report File Format list.
Options are:
{
PDF
{
CSV
{
MS Excel
{
MS Excel (Data-only)
7. To send a report by email (optional), select the Send by Email box, and enter the email address
of the receiver.
Reports can be sent to only one email address.
8. Specify the parameters for the report in the Parameter Value area.
The parameters required for adding a schedule report vary with report templates, which will be
described in following information.
9. Click OK.
Viewing a scheduled report
1. Click the Report tab.
2. From the navigation tree, select Scheduled Reports > All Scheduled Reports to enter the All
Scheduled Reports page.
3. Click the History Report icon of the target scheduled report you want to view.
The History Report page appears.
4. Click the View link to open a report.