H3C Technologies H3C Intelligent Management Center User Manual
Page 314
292
The Client List page displays all clients.
Client List contents
{
Client Status—Current status of the client. The
icon means the client is successfully
associated, and the
icon means the client is authenticated successfully.
{
Radio Type—Radio type of the access AP.
shows the icons for the radio types.
Table 19 Radio type represented by icon
Icon Radio
type
802.11a
802.11b
802.11g
802.11bg
802.11at
802.11an
802.11gn
•
802.11n (2.4GHz)
•
802.11bgn
•
802.11n
•
802.11n (5GHz)
{
Signal Strength—Signal strength of the access AP.
shows the icons and their signal
strengths.
Table 20 Signal strength represented by icon
Icon Signal strength
Signal strength > –57 dBm
–67 dBm < signal strength <= -57 dBm
–71 dBm < signal strength <= –67 dBm
–81 dBm < signal strength <= –71 dBm
Signal strength < –81 dBm
{
Endpoint Identification—Endpoint identification information, including the endpoint type,
vendor, and OS. For more information about endpoint identification, see "
{
MAC Address—MAC address of the client.
{
Username—Username used by the client to access the wireless network.
For a client that goes online through an MSM series fat AP/fit AP, the username is
displayed when the client accesses the network after passing third-party/local
authentication. Otherwise, this field is blank.
For a client that goes online through a Comware-based fat AP/fit AP, the username
(obtained from the AC/fat AP) is displayed when 802.1X authentication is enabled on the
AC/fat AP. Such usernames cannot be modified.