H3C Technologies H3C Intelligent Management Center - Manual (Page 602)

580
Modifying an MP policy
You cannot modify the default MP policy default_mp_plcy that has been bound to radios. To modify
a non-default MP policy, unbind it from the radios first. For more information about unbinding an MP
policy with radios, see " Viewing radios bound to an MP policy and removing the bindings ."
To modify an MP policy:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs or WLAN
Manager > Resource Management > Fat APs.
3. Click the device label of an AC or fat AP to enter the device information page.
4. On the Mesh Management menu on the lower right corner of the page, click MP Policy
Management.
The MP Policy Management page appears.
5. Click the Operation icon of an MP policy, and then select the Modify icon from the
menu.
6. Modify MP policy parameters as required. You cannot modify the policy name. For more
information about other parameters, see "
Adding an MP policy ."
7. Click OK.
Deleting an MP policy
You cannot delete the default MP policy default_mp_plcy that has been bound to radios. To delete a
non-default MP policy, unbind it from the radios first. For more information about unbinding an MP
policy with radios, see " Viewing radios bound to an MP policy and removing the bindings ."
To delete an MP policy:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs or WLAN
Manager > Resource Management > Fat APs.
3. Click the device label of an AC or fat AP to enter the device information page.
4. On the Mesh Management menu on the lower right corner of the page, click MP Policy
Management.
The MP Policy Management page appears.
5. Click the Operation icon of an MP policy, and then click the Delete icon on the menu
that appears.
6. Click OK.
Binding an MP policy
You can bind an MP policy to multiple radios. The settings in the MP policy trigger the establishment
and maintenance of the mesh links on the radios. By default, the default MP policy default_mp_plcy is
bound to radios.
Binding an MP policy to the radios on a fit AP
1. Click the Service tab.