H3C Technologies H3C Intelligent Management Center - Manual (Page 82)

60
{
IP Address—Enter the IPv4 address of the fit AP. WSM supports fuzzy matching for this field.
{
Online Status—Select an online state of the fit AP. Options are Online and Offline.
6. Click Query.
The Fit AP List displays all fit APs in the group that match the query criteria. Click Reset to clear
the query criteria and display all fit APs in the group.
Adding fit APs to a group
One fit AP can belong to only one group. After you add a fit AP to a group, it is removed from its
original group.
To add fit APs to a group:
1. Click the Service tab.
From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
2. Click the Operation icon for an AC.
3. Select Group Configuration from the menu.
The Group List displays all fit AP groups on the AC.
4. Click the name of the target group.
The Fit AP List displays all fit APs in the group.
5. Click Add to Group.
The Select Device window appears, displaying all the fit APs managed by the AC where the
group is configured.
6. Enter or select one or more of the following query criteria to search for the fit APs you want to
add to the group.
{
Label—Enter the label of the Fit AP. WSM supports fuzzy matching for this field.
{
Serial Number—Enter the serial number of the fit AP. WSM supports fuzzy matching for this
field.
{
IP Address—Enter the IPv4 address of the fit AP. WSM supports fuzzy matching for this field.
{
Online Status—Select the online status of the fit AP. Options are Online and Offline.
{
Group Name—Select the current group to which the fit AP belongs. Options include all
existing groups in WSM.
{
Location View—Enter or select the name of the location view to which the fit AP belongs.
WSM supports fuzzy matching for this field
7. Click Query.
The Fit AP List displays all fit APs matching the query criteria.
8. Select the fit APs you want to add to the group.
9. Click OK.
The selected fit APs appear in the Fit AP List of the group.