H3C Technologies H3C Intelligent Management Center - Manual (Page 165)

143
Adding/Removing a WLAN to/from a group
A WLAN is automatically added to the default group after being created, and cannot be removed
from the default group.
A WLAN can be added to multiple groups.
To add/remove a WLAN to/from a group:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
3. Click the Operation icon for the target AC and select Group Configuration from the menu.
4. Click the Bind to WLAN icon for the target group.
5. Select a WLAN from the WLAN List:
WLAN List
{
Binding Status—If this option is selected, the WLAN is already in the group. If this option is
not selected, the WLAN is not in the group. If you clear a WLAN, the WLAN is removed
from the group.
{
SSID—Enter the SSID of the WLAN.
6. Click OK.
The Result List page appears, showing the operation results.
Result List
{
Group Name—Name of the group.
{
SSID—SSID of the WLAN.
{
AC—Label of the AC to which the group belongs.
{
Result—Operation results.
7. Click Back to go back to the Group Configuration page.
Managing APs in a group
An AP is automatically added to the default group when it is associated with an AC.
An AP can only be added to one group at the same time.
Viewing the AP list in the group
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
3. Click the Operation icon for the target AC and select Group Configuration from the menu.
4. Click the name link of a group.
The AP List displays all APs in the group.
AP List
{
Online Status—Online status of the AP. Options include Online and Offline.
{
AP Label—Label of the AP.
{
SN—Serial number of the AP.
{
IP Address—IP address of the AP.