H3C Technologies H3C Intelligent Management Center - Manual (Page 597)

575
2. From the navigation tree, select WLAN Manager > Resource Management > Fat APs.
3. Click the name link of a fat AP to enter the device information page.
4. On the Mesh Management menu on the lower right corner of the page, click Mesh Profile
Management.
The Mesh Profile Management page appears.
5. Click the Modify icon .
6. Select None from the Mesh Profile ID list.
7. Click OK.
Viewing radios bound to a mesh profile
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs or WLAN
Manager > Resource Management > Fat APs.
3. Click the device label of an AC or fat AP to enter the device information page.
4. On the Mesh Management menu on the lower right corner of the page, click Mesh Profile
Management.
The Mesh Profile Management page appears.
5. Click the Operation icon of a mesh profile, and then select Bound Radios from the
menu.
The Radio List dialog box appears, displaying radios bound to the mesh profile. You can
perform the following operations:
{
Unbind—Select the radios that you want to unbind from the mesh profile, and then click
Unbind to remove the bindings.
{
Close—Click Close to close the dialog box.
Managing MP policies
Link formation and maintenance are driven by the attributes specified in the MP policy. You can
perform the following operations by MP policy management.
Viewing an MP policy
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs or WLAN
Manager > Fat APs.
3. Click the device label of an AC or fat AP to enter the device information page.
4. On the Mesh Management menu on the lower right corner of the page, click MP Policy
Management.
The MP Policy Management page appears.
MP Policy List contents
{
Policy Name—Name of the MP policy.