H3C Technologies H3C Intelligent Management Center User Manual
Page 417
395
{
Lock/Unlock—Allows you to lock/unlock the position of the custom view on the topology. A
custom view cannot be moved after being locked.
•
To create a new custom view, right-click on the blank area, and then select Add Wireless Custom
View from the shortcut menu.
4.
Double-click the icon of a custom view, or right-click a custom view icon and then select Open
Topology from the shortcut menu. The topology of the custom view displays the AC and its
managed fit APs contained in the view.
Perform the following operation on the AC from the topology:
•
Click the icon of the AC. The tip window displays the basic information about the AC, including
the device label, IP address, device status, sysname, vendor, system uptime, total APs, and clients.
For more information, see "
Viewing the device topology of an AC
."
Perform the following operations on a fit AP from the topology:
•
Click the icon of a fit AP. The tip window displays the basic information about the fit AP,
including the device label, IP address, device status, and clients. For descriptions of these
parameters, see "
Viewing the device topology of an AC
•
Right-click the icon of a fit AP. The menu offers the following options:
{
Device Information—Allows you to view the detailed information about the fit AP.
{
View Physical Topology—Allows you to view the physical topology between the fit AP and
the AC. This option is available only when both the AC and fit AP are Comware-based
devices.
{
Delete Device from this View—Allows you to delete the fit AP from the current custom view.
{
Lock/Unlock—Allows you to lock/unlock the position of the fit AP on the topology. A fit AP
cannot be moved after being locked.
Other options that can be accessed from the custom view topology:
•
Double-click the icon of a fit AP to display all the clients associated with it. Double-click the fit AP
icon again to hide the clients.
You can perform the following operations on a client from the topology:
{
Click the icon of a client. The tip window displays the basic information about the client,
including the MAC address, user name, SSID name, radio type, signal strength, and RSSI.
For descriptions of these parameters, see "
Viewing the device topology of an AC
{
Right-click the icon of a client. The menu contains these management options that can be
applied to the client: Client Information, Locate, and Lock/Unlock. For more information
about these management options, see "
Viewing the device topology of an AC
."
•
Right-click a primary link between the AC and a fit AP, and then select Link Information from the
shortcut menu. A window appears, displaying information about the link, including Control
Channel Security Policy, Control Channel Startup Time, Data Channel Security Policy, and Data
Channel Startup Time. For descriptions of these parameters, see "
Viewing the device topology of
NOTE:
The Link Information option on the right mouse click menu is available only when both the AC and
fit AP are Comware-based devices.
•
Right-click the blank area on the topology, and then select Add Devices to this View from the
shortcut menu to open the wireless custom view page. From the Select Devices window, select the
desired fit APs you want to add to the view, and then click OK.