H3C Technologies H3C Intelligent Management Center - Manual (Page 250)

228
NOTE:
You can sort the Wireless Logical Interface List by every field except the Operation field. Click the
column label to sort the list by the selected field. The column label is a toggle switch that allows you to
toggle between the sort options specific for each field.
Querying wireless logical interfaces
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fat APs.
The Fat AP List page displays all fat APs.
3. Click the Operation icon for the fat AP for which you want to query wireless logical
interfaces.
4. Select Wireless Logical Interface Configuration from the menu.
The Wireless Logical Interface Configuration page appears. All wireless logical interface
information for the fat AP is displayed on the Wireless Logical Interface List.
5. Enter or specify one or both of the following query criteria:
{
Description—Enter a description for the interface. WSM supports fuzzy matching for this
field.
{
SSID—Enter the SSID of the fat AP. WSM supports fuzzy matching for this field.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
6. Click Query.
The Device List displays all radio interfaces matching the query criteria. Click Reset to clear
the query criteria and display all radio interfaces.
Adding a wireless logical interface
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fat APs.
The Fat AP List page displays all fat APs.
3. Click the Operation icon for the fat AP to which you want to add a wireless logical
interface.
4. Select Wireless Logical Interface Configuration from the menu.
The Wireless Logical Interface Configuration page appears. All wireless logical interface
information for the fat AP is displayed on the Wireless Logical Interface List.
5. Click Add Interface.
The page for adding wireless logical interfaces appears.
6. Enter the ID of the wireless logical interface. It cannot be the same as any other wireless logical
interface of the fat AP.
7. Click OK.
The Adding Interface Result page appears, displaying the operation result for adding the
wireless logical interface.
8. Click Back to go back to the Wireless Logical Interface Configuration page.