H3C Technologies H3C Intelligent Management Center - Manual (Page 185)

163
{
AP Label—Label of the AP.
{
SN—Serial number of the AP.
{
IP Address—IP address of the AP.
{
MAC Address—MAC address of the AP.
{
Model—Model of the AP.
5. To refresh the page, click Refresh.
6. To return to the Group Configuration page, click Back.
Querying fit APs
• Basic query:
a. Click the Service tab.
b. From the navigation tree, select WLAN Manager > Resource Management > ACs.
c. Click the operation icon for the target Aruba AC, and select Group Configuration from
the menu.
The Group Configuration page appears and all AP groups are displayed in the AP group
list.
d. Click the name of the target AP group.
The APs in Group page appears and all APs in the AP group are displayed in the fit AP list.
e. Enter the label or IP address of the AP in the query box on the top right of the page.
Both the label and IP address query criteria support fuzzy match.
f. Click the query icon .
All APs matching the criteria are displayed in the list.
g. To display all APs, clear the query box and click the query icon .
• Advanced query:
h. Click the Service tab.
i. From the navigation tree, select WLAN Manager > Resource Management > ACs.
j. Click the operation icon for the target Aruba AC, and select Group Configuration from
the menu.
The Group Configuration page appears and all AP groups are displayed in the AP group
list.
k. Click the name of the target AP group.
The APs in Group page appears and all APs in the AP group are displayed in the fit AP list.
l. Click the icon to expand the advanced query area.
m. Set the query criteria:
− AP Label—Enter the label of the AP. This field supports fuzzy match.
− Serial Number—Enter the serial number of the AP. This field supports fuzzy match.
− IP Address—Enter the IP address of the AP. This field supports fuzzy match.
− Online Status—Select the online status for the AP. Options are Unlimited, Online, and
Offline.
n. Click Query.
All APs matching the criteria are displayed in the list.