H3C Technologies H3C Intelligent Management Center - Manual (Page 151)

129
Managing policy templates
An AC issues radio policies and service policies to the managed fit APs. Applying an appropriate
policy template to the AC can simplify the procedure because you do not need to configure the same
parameters repeatedly on each policy. You can manage the following types of policy templates on
the Template Management page:
• Radio policy templates
• Service policy templates
Managing radio policy templates
Applying an appropriate radio policy template to the AC can simplify the radio policy configuration
procedure because you only need to change the policy name.
Viewing the radio policy template list
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Comware-Based tab.
4. In the Network Management area, click the Template Management link.
The Template Management page appears. By default, the Radio Policy Template List is
displayed, showing all radio policy templates.
Radio Policy Template List contents
{
Policy Name—Name of the radio policy template.
{
Beacon Interval—Interval at which a fit AP sends a beacon frame.
{
DTIM Interval—Number of beacon intervals an AP waits before it sends buffered multicast
and broadcast frames.
{
RTS Threshold—Length of frames for which the RTS method is used.
{
Fragment Threshold—Maximum length of frames that can be transmitted without
fragmentation.
{
Rx Lifecycle—Interval for an AP to hold a received frame in its buffer memory.
{
Modify—Click the Modify icon for the target radio policy template to modify its
parameters. For more information, see "
Modifying a radio policy template ."
{
Delete—Click the Delete icon for the target radio policy template to delete the template.
For more information, see "
Deleting a radio policy template ."
Viewing radio policy template details
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Comware-Based tab.
4. In the Network Management area, click the Template Management link.