H3C Technologies H3C Intelligent Management Center - Manual (Page 489)

467
NOTE:
You can sort the Detected Channel List by the Channel Number, Radio Type, Last Detection Time and
Detecting AC fields. Click the column label to sort the list by the selected field. The column label allows
you to toggle between the various sort options specific to each field.
Synchronizing detected channel information from ACs
By default, IMC synchronizes the most recent channel information from managed ACs every 2 hours.
You can also manually perform the synchronization operation.
To manually synchronize the detected channel information from managed ACs to IMC:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3. Click the Detected Channel List tab.
The Detected Channel List displays all detected channels.
4. Click Synchronize.
The page is refreshed to display the most recent detected channel address list after the
synchronization process is completed.
Querying channels on the detected channel list
To perform a basic query:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3. Click the Detected Channel List tab.
The Detected Channel List displays all detected channels.
4. Enter a radio type next to the query field. WSM supports fuzzy matching for this field.
5. Click the Query icon . The Detected Channel List displays all channels matching the query
criteria.
6. Clear the Query field, and click the Query icon to display all channels.
To perform an advanced query:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3. Click the Detected Channel List tab.
The Detected Channel List displays all detected channels.
4. Click the Advanced icon next to the query field to expand the area.
5. In the Query Criteria area, specify one or more of the following query conditions:
{
Radio Type—Select a radio type from the list. Options are 802.11a, 802.11b, 802.11g,
802.11gn, and 802.11an.
{
AC—Select the AC with which the sensor that detects the channels is associated.
6. Click Query.