H3C Technologies H3C Intelligent Management Center User Manual
Page 667
645
•
Begin Time/End Time—These two parameters appear only when you select Custom Range. Click
the field next to Begin Time/End Time to select the start time/end time from the calendar that
appears, in the format of YYYY-MM-DD hh:mm. The end time must be later than the start time.
•
Online more than(0-999999 minutes)—Enter the online duration of clients to be collected. The
report collects statistics about clients whose online duration is longer than the specified time.
shows an example client detail report.
Figure 106 Client detail report
Client detail report fields:
•
Report Period—Time range during which the statistics are collected.
•
Position—Name of the location view for which the statistics are collected or All AP Devices.
•
MAC Address—MAC address of the client.
•
Client Name—Name of the client.
•
IP Address—IPv4 address of the client.
•
Radio Type—Radio type.
•
SSID—SSID used by the client.
•
AP Name—Name of the AP with which the client is associated.
•
Position—Location view to which the AP belongs.
•
Online Time—Time at which the client successfully associated with the AP.
•
Session Duration—Session duration of the client.
•
Received Traffic (MB)—Total traffic received by the client.
•
Sent Traffic (MB)—Total traffic sent by the client.
•
Total Traffic (MB)—Total traffic received and sent by the client.