Modifying the vlan for wireless logical interfaces, Deleting wireless logical interfaces – H3C Technologies H3C Intelligent Management Center User Manual
Page 252
230
The required key parameters depend on the port security mode. For more information,
see
.
8.
Click OK.
The Modify Port Security page appears, displaying the operation result for modifying the port
security mode for the selected wireless logical interface.
9.
Click Back to go back to the Wireless Logical Interface Configuration page.
Modifying the VLAN for wireless logical interfaces
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Fat APs.
The Fat AP List page displays all fat APs.
3.
Click the Operation icon
for the target fat AP.
4.
Select
Wireless Logical Interface Configuration from the menu.
The Wireless Logical Interface Configuration page appears. All wireless logical interface
information for the fat AP is displayed on the Wireless Logical Interface List.
5.
Perform one of the following steps:
{
Click the Operation icon
for the wireless logical interface for which you want to modify
the VLAN, and select Modify VLAN.
{
Specify the wireless logical interfaces for which you want to modify the VLAN, and click
Modify VLAN on the Wireless Logical Interface List.
The Modify VLAN page appears.
6.
Specify a VLAN from the VLAN list. The VLAN List contains all existing VLANs on the fat AP.
7.
Click OK.
The Modify VLAN page appears, displaying the operation results for modifying the VLAN to
which the selected interfaces belong.
8.
Click Back to go back to the Wireless Logical Interface Configuration page.
Deleting wireless logical interfaces
To delete a wireless logical interface that has been bound to a service policy, first set the interface ID
of the wireless logical interface to –1.
To delete a wireless logical interface:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Fat APs.
The Fat AP List page displays all fat APs.
3.
Click the Operation icon
for the target fat AP.
4.
Select
Wireless Logical Interface Configuration from the menu.
The Wireless Logical Interface Configuration page appears. All wireless logical interface
information for the fat AP is displayed on the Wireless Logical Interface List.
5.
Perform one of the following steps: