H3C Technologies H3C Intelligent Management Center - Manual (Page 320)

298
{
RSSI—RSSI value of the client signal.
Traffic Statistics
{
Reception (KB)—Total amount of traffic received by the client.
{
Transmission (KB)—Total amount of traffic transmitted by the client.
{
Received Retry Bytes—Number of retransmitted bytes received by the client.
{
Transmitted Retry Bytes—Number retransmitted bytes sent by the client.
Client Bandwidth - Today
{
Client Bandwidth - Today—Displays the trend of the sent/received packet rate from 0:00
today to the display time.
Exporting clients
This function allows you to export clients that match specific criteria in a .csv file.
To export clients:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Clients.
The Clients page displays all clients.
3. Click Export.
The Download Exported Template File appears.
4. Click the Export Result link to download the exported .csv file.
Configuring a sampling client
WSM allows operators with the administrator privileges to configure a client on the client list as
sampling client. A sampling client is used for sampling when WSM performs AP-based wireless
locating. This function applies to only the clients that have associated with a Comware-based fat
AP/fit AP.
To configure a sampling client:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Clients.
The Clients page displays all clients.
3. Configure the client in one of the following ways:
{
Click the Operation icon and select Set as Sample MAC to configure the client as a
sampling client.
{
Click the Operation icon and select Undo Set as Sample MAC to configure the client
as a non-sampling client.
Modifying client information
This function allows you to modify the basic information of a client.
To modify the client information:
1. Click the Service tab.