H3C Technologies H3C Intelligent Management Center - Manual (Page 344)

322
− HP
− Cisco
− Aruba
{
Radio Type—Select a type of radio. Options are:
− All
− 802.11a
− 802.11b
− 802.11g
− 802.11bg
− 802.11at
− 802.11an
− 802.11gn
− 802.11n (2.4GHz)
− 802.11bgn
− 802.11n
− 802.11n (5GHz).
{
Channel—Enter the working channel of the radio. WSM supports fuzzy matching for this
field.
{
Operation Status—Select an operation state of the radio. Options are:
− All
− Down
− Up
An empty field or a field set to Unlimited does not serve as a query criterion.
c. Click Query.
The Radio List displays all radios matching the query criteria.
d. To clear the query criteria and display all radios, click Reset.
Modifying radio settings
1. Click the Service tab.
From the navigation tree, select WLAN Manager > Resource Management > Radios. The Radio
List page displays all radios.
2. Click the Modify icon for the radio you want to modify.
For information about modifying the radio settings for an MSM series fat AP, see "
Modifying
the radio parameters for a fat AP ."
For information about modifying the radio settings for an MSM series fit AP, see " Modifying
radio parameters for a fit AP ."
For information about modifying the radio settings for a Comware-based fat AP, see
"
Modifying radio parameters for a fat AP ."
For information about modifying the radio settings for a Comware-based fit AP, see " Modifying
radio parameters for a fit AP ."