Radio resource usage report – H3C Technologies H3C Intelligent Management Center User Manual
Page 658
636
•
AP Name—Access point name.
•
Radio ID—ID of the radio.
•
AP Location—Location view to which the AP belongs.
•
Max Reception Speed (bits/s)—Maximum reception speed of the radio.
•
Average Reception Speed (bits/s)—Average reception speed of the radio.
•
Max Transmission Speed (bits/s)—Maximum transmission speed of the radio.
•
Avg Transmission Speed (bits/s)—Average transmission speed of the radio.
Radio resource usage report
This report displays resource usage statistics for AP radios.
To view a radio resource usage report, configure the following parameters:
•
Parameter "Begin Time and End Time"—Select a statistics collection time range from the list. You
can select a specific time range, such as Last Hour, Last Day, Last Week, or Last Month, or
select Custom Range, and then specify the start time and end time manually.
•
Location—Select a specific location view for statistics collection, or select All AP Devices.
•
Begin Time/End Time—These two parameters appear only when you select Custom Range. Click
the field next to Begin Time/End Time to select the start time/end time from the calendar that
appears, in the format of YYYY-MM-DD hh:mm. The end time must be later than the start time.
shows an example radio resource usage report.