H3C Technologies H3C Intelligent Management Center - Manual (Page 83)

61
Deleting fit APs from a group
Deleting a fit AP from a group does not delete it from the system. The deleted fit AP is moved
automatically to the Default Group on the AC. You cannot delete fit APs from the Default Group.
To delete fit APs from a group:
1. Click the Service tab.
From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
2. Click the Operation icon for an AC.
3. Select Group Configuration from the menu.
The Group List displays all fit AP groups on the AC.
4. Click the name of the target group.
The Fit AP List displays all fit APs in the group.
5. Select the fit APs you want to remove from the group.
6. Click Delete from this Group.
A confirmation dialog box appears.
7. Click OK.
Moving fit APs from one group to another group
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
3. Click the Operation icon for an AC.
4. Select Group Configuration from the menu.
The Group List displays all fit AP groups on the AC.
5. Click the name of the group where the fit APs to be moved are located.
The Fit AP List displays all fit APs in the group.
6. Select the fit APs you want to move.
7. Click Change Group.
The Change Group dialog box appears.
8. Select the group to which you want to move the selected fit APs from the Group list.
9. Click OK.
Configuring WLANs
This function allows you to configure the VSC on an AC. A VSC is the wireless service that can be
provided by fit APs managed by an AC. After being bound to a fit AP group, a WLAN deploys the
VSC to all of the fit APs in the group, so that the fit APs can provide wireless services for clients.
You can access the WLAN configuration feature from the AC List page, the AC details page, or the
configuration management page. The following information uses the AC List page as an example.