Synchronizing fit aps, Exporting all fit aps, Locating a fit ap on a mapbar map – H3C Technologies H3C Intelligent Management Center User Manual
Page 269
247
{
Collect Client Statistics—Select this option to enable the fit AP to collect statistics about
associated clients. This option does not appear when the operating mode is Monitor and
Sensor.
{
Description—Enter a description for the radio.
6.
Click OK.
Synchronizing fit APs
WSM supports synchronizing the fit AP configuration manually.
To manually synchronize fit APs:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit AP List page displays all fit APs.
3.
Select the fit AP you want to synchronize.
4.
Click Synchronize to start synchronizing the selected fit APs.
When the process is complete, the page is refreshed to display the most recent fit AP
information.
Exporting all fit APs
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit AP List page displays all fit APs.
3.
Click Export All.
The page for exporting fit AP appears.
4.
Click Export Result to save the .csv file.
Locating a fit AP on a Mapbar map
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit AP List page displays all fit APs.
3.
Click the Operation icon
for the fit AP you want to locate on a Mapbar map.
4.
Select Locate to Map from the menu.
The Mapbar Map page appears.
The selected fit AP is highlighted on the Mapbar map. Before locating a fit AP on a Mapbar
map, configure wireless locating. For more information, see "