Viewing radios bound to a service policy – H3C Technologies H3C Intelligent Management Center User Manual
Page 128
106
To modify a service policy:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
3.
Click the Operation icon
for the target AC.
4.
Select
Service Policy from the menu.
The Service Policy Management page appears. All the service policy information of the AC is
displayed on Service Policy List.
5.
Click the Operation icon
for the service policy you want to modify.
6.
Select
Modify from the menu.
The Modify Service Policy page appears.
7.
Modify the service policy parameters as needed, see "
A service policy ID cannot be modified.
8.
Click OK.
Viewing radios bound to a service policy
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
3.
Click the Operation icon
for the target AC.
4.
Select
Service Policy from the menu.
The Service Policy Management page appears. All the service policy information of the AC is
displayed on the Service Policy List.
5.
Click the Operation icon
for the service policy you want to view.
6.
Select Bound Radios
from the menu.
The Radio List dialog box appears.
The Bound Radios list displays information about all radios bound to the current service policy.
Bound Radio List contents
{
Admin Status—Administrative state for the radio. Options are Up and Down.
{
Radio Type—Radio type. Options are:
−
802.11a
−
802.11b
−
802.11g
−
802.11gn
−
802.11an.
{
AP Label—Label of the AP to which the radio belongs.
{
AP Name—Name of the AP to which the radio belongs.
{
SN—Serial number of the AP to which the radio belongs.
{
Radio Policy Name—Name of the radio policy to which the radio is bound.