H3C Technologies H3C Intelligent Management Center User Manual
Page 392
370
{
Logoff Time—Logoff time of the fit AP, or fat AP failure time detected by WSM, in the format
YYYY-MM-DD hh:mm:ss.
{
Recovery Time—Time when the fit AP gets online again, or time when WSM detects the fat
AP is reconnected, in the format YYYY-MM-DD hh:mm:ss.
{
Logoff Duration—Logoff duration of the fit AP, or failure duration of the fat AP detected by
WSM, in the format YYYY-MM-DD hh:mm:ss.
7.
Click Close.
Testing network connectivity of an AP on a location view
This function allows you to test the reachability of a managed AP from the IMC server, and to
troubleshoot and locate connectivity problems.
To ping or traceroute the selected AP from the Sub-location/Device List page:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > View Management > Location Views.
The Location List displays all location views.
3.
Continue the procedure in one of the following ways:
{
Click the name of the target location view.
The Sub-location/Device List page appears.
{
On the Sub-location/Device List page, click the name of the target sub-location view.
The Sub-location/Device List page appears.
4.
Click the Operation icon
for the AP you want to ping or traceroute.
5.
From the menu, select Ping or TraceRoute.
The Ping or Traceroute dialog box appears. View the results of your ping or traceroute
operation.
6.
Click OK.
Opening web manager for a fat AP on a location view
Web manager enables quick web access to managed fat APs.
To use web manager to access and manage the selected fat AP from the Sub-location/Device List
page:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > View Management > Location Views.
The Location List displays all location views.
3.
Continue the procedure in one of the following ways:
{
Click the name of the target location view.
The Sub-location/Device List page appears.
{
On the Sub-location/Device List page, click the name of the target sub-location view.
The Sub-location/Device List page appears.
4.
Click the Operation icon
for the fat AP you want to open the web manager.
5.
From the menu, select
Open Web Manager.